Now my fiancee, I swear has at least 1 hole in EVERY pair of jeans! So as a joke I want to do this on all his jeans...(lol)
You can always check the site out yourself at: http://bymiek.blogspot.com/2010/10/dhz-monster-knie.html
Here's the tutorial in English:
DIY: Monster Knee
If you do a crack in pants must fix, make it something beautiful! As a sample:
You will need:• Bit dust
Vlieseline •
White • Felt
• Black embroidery thread & needle
• If necessary sewing machine
Iron the fusible interfacing on the back of your piece of fabric and cut the fabric then in an oval. Make sure the fabric about 3 cm wider and higher than the crack.
Cut a piece of felt in the shape of teeth, take a seam value 'of 1 cm at the top. The width must be equal to the tear.
Step 2:
Sew the teeth at the top of your piece of fabric, right along the edge (also by hand, I did it with the sewing machine).
Step 3:
Place the fabric with teeth behind the crack, so that the dust everywhere over an inch wider than the crack.
Sew with the embroidery thread around with a basting stitch (----), about 1/2 inch of the crack.
If you're around, then sew again around the openings between the stabbing also to fill (-----).
Cut two circles for the eyes from the white felt. Sew with the embroidery thread, such as this:
Ready!
No comments:
Post a Comment